How to boost wifi signal through walls?

How to boost wifi signal through walls? For many people, getting online has become an essential part of their daily lives. Having slowed browsing, dropped Wi-Fi signals, and wireless dead zones. [It’s not that critical, but it’s still significant.

How to boost wifi signal through walls?

You can use various tools to see if your Wi-Fi has become sluggish. If you’re having problems with your network, you can try a few things. Even if you have to stand next to your router to get decent reception, these simple tips can help improve your network.

  1.     Verify Your Hardwired Connection to the Internet

Before you point the finger at your Wi-Fi, check to see if the connection to the internet outside your house is working correctly.

Check your internet speed with a speed test. Your ISP or a new modem may be required if your connection speed doesn’t match what you’re paying for. It’s time to upgrade if you’re still experiencing slow internet even though your speed test results match your paying for. How to boost wifi signal through walls? As a result, my grandmother thought her Wi-Fi was malfunctioning, only to learn from me that she had a 3Mbps connection.

If the modem appears to be functioning correctly, try the test again while standing right next to the router’s wireless router. Wi-Fi coverage may be to blame if you get similar speeds next to the router but not in other rooms of your home. How to boost wifi signal through walls? Even if you’re standing next to the router, your internet speed may still be sluggish.

  1.     Upgrade the Firmware on Your Router

To gain a little more speed, router manufacturers constantly update their software. Your device’s manufacturer and model determine how easy or difficult it is to upgrade your firmware.

When it comes to updating routers, the process is simply clicking on a firmware upgrade button. Other routers, especially older ones, require that you go to the manufacturer’s website, download the firmware file from the router’s support page, and upload it to the administration panel. How to boost wifi signal through walls? Even though it’s time-consuming, it’s worthwhile because the problem can be fixed so easily.

Your wireless network may not be in trouble, but you should still regularly update your device’s firmware to take advantage of performance improvements, new features, and security fixes. How to boost wifi signal through walls? We’ve put together a guide on accessing your router’s settings if you need help.

A third-party firmware like the open-source DD-WRT may be worth trying if you’re looking to get the most out of your current router. If you do this, your router’s performance will improve, and you’ll be able to use more advanced networking features, such as a virtual private network (VPN). How to boost wifi signal through walls? While the setup process is a little more involved, it may be worth it for those comfortable with technology.

  1.       Place Routers in the Best Possible Position

In some homes, the Wi-Fi signal will not be evenly distributed. In theory, it may make sense to put the router in a cabinet or near a window where the cable is plugged in, but this isn’t always the best location. How to boost wifi signal through walls? A central location is preferable to a remote location, as it ensures that the router’s signal can reach all corners of your home.

On the other hand, wireless routers necessitate open areas free of walls and obstructions. Even though it’s tempting to hide the ugliness of the black box behind a stack of books, it’s best to leave it out in the open for maximum reception (which should prevent the router from overheating, too).

Please keep it away from any heavy-duty appliances or electronic devices that could interfere with Wi-Fi reception. The performance of your workstation and router can be significantly enhanced by removing even a single obstacle in their path.

External antennas on a router should be oriented vertically to increase coverage. You can even mount the router on the wall or the top shelf to get a better signal. Your network coverage can be visualized using a variety of tools.

Netgear’s WiFi Analytics, for example, is one of many available as mobile apps.

  1.     What is your tempo?

Your network administrator interface should be configured to its fullest potential for maximum efficiency. Using the 5GHz band instead of the more common 2.4GHz band on a dual-band router may faster throughput.

Faster speeds and less interference from other networks and devices are just two benefits of using 5GHz, which has a lower frequency than the other two. There are some drawbacks to using a 2.4GHz signal, such as its inability to handle obstructions and long distances.

Modern dual-band routers should let you use the same network name (also known as an SSID) across both bands. It is possible to set up a 5GHz network on your router using the same SSID and password as your existing 2.4GHz network. As a result, your gadgets will always use the best signal available. Try connecting to the SmithHouse-5GHz SSID manually whenever possible.

  1.     It’s Time to Flip the Switch

Those who live in densely populated areas face a particular problem with interference. Other wireless networks and some cordless phone systems, microwaves, and other electronic devices all have the potential to slow down your network’s speed.

Had any experience with childhood walkie-talkies? The units had to be on the same “channel.” Furthermore, you could listen to your neighbours’ conversations even if they were using different speakers because you shared the same channel. Modern routers can do the same when communicating with your devices, switching between other channels.

In most cases, routers will automatically select the best channel for your wireless network, but if other wireless networks are using the same track, you’ll experience signal congestion.

Older or less expensive routers may use a preset channel even if it isn’t congested, while a router set to Automatic will attempt to find the least crowded channel. That might be a problem.

You can see which Wi-Fi channels your neighbours are using on Windows-based PCs. You can see all your area’s wireless networks and channels by typing netsh WLAN in a command prompt. The network analyzers listed above can also provide you with this data, often in a graphical format that is easier to understand.

For example, most of our networks and neighbours use channels 6 and 11 at the PCMag office. The only channels that don’t overlap at 2.4GHz are 1, 6, and 11, so stick to those when using that frequency (which can degrade performance). Choosing a channel at 5GHz should be much simpler due to the frequency band’s non-overlapping nature.

  1.       Set Wi-Fi Intruders to Idle

There’s a good chance the issue isn’t related to interference or Wi-Fi range. As long as your network is open or has a weak password, you could be sharing it with an unwanted guest or two. Using your Wi-Fi to download multiple 4K movies from your neighbour’s computer will negatively impact your video chats.

A list of devices on your Wi-Fi can help you find out if any uninvited guests are lurking in the shadows. You may even discover that one of your children is hogging bandwidth without your knowledge via the router’s admin interface, which acts as a traffic analyzer. If they are, here’s how to get them started.

Secure your network with a strong password once you’ve discovered the intruder and fixed the problem. Use WPA2 instead of WEP, which is notoriously easy to crack.

  1.     Ensure the Quality of Your Products

Like the Netgear menu above, most modern routers come with Quality of Service (quality of service) tools to limit how much bandwidth apps use. Video calls can be prioritized over file downloads using Quality of Service (quality of service).  Your call with grandma won’t be interrupted because someone else is downloading a large file from Dropbox. Grandma’s file is more important than theirs, so that it will take longer. Depending on the time of day, you may be able to adjust the quality of service settings to give different apps higher priority.

In advanced settings, quality of service settings is typically found in the network’s administrator interface. Some routers make it even easier by allowing you to set a one-click priority for multimedia or gaming. There are things you can do to improve the experience of streaming games while sharing a network.

  1.     Your Antenna Needs to Be Replaced

An external antenna can improve the signal strength of your router if it has an internal one. If your router didn’t come with antennas pre-installed, you might be able to purchase additional antennas from the manufacturer.

Antennas can either be omnidirectional (sending a signal in all directions) or directional (sending a signal only in one order). Omnidirectional antennas are more common. When purchasing an external antenna, make sure it is labelled “high-gain” to make a noticeable difference.

A directional antenna is a better choice because it is more likely that your network has no weak spots. Your external antenna will broadcast the signal in the direction of your soft spot. For more information on what you’ll need, visit the website of the router’s maker.

  1.       Replace Outdated Hardware

Your current equipment should be utilized to the fullest extent possible, but getting the most out of older equipment is not always possible. When it comes to back-end devices, such as networking gear, we tend to follow the “if it ain’t broke, don’t fix it” mentality. It’s possible that if you bought your router more than a few years ago, you’re still using the 802.11n standard (or, God forbid, 802.11g).

  1. Wi-Fi Extenders and Mesh Networks: Expand Your Network’s Range

Creating circuits for powerline adapters is possible with newer homes, but why not use Ethernet cables instead? Ethernet or fibre optics are still the most reliable options for Internet access in your home. That said, let’s take a look at some of the choices.

  1. To boost the WiFi signal through walls, use a mesh network

My new workplace has a large concrete wall that blocks the WiFi signal from passing through unless you sit right next to it and use the 2.4GHz network, in which case it works. I chose 2.4GHz over 5GHz because the latter is more likely to suffer from interference and has a more challenging time passing through walls.

As a result, I went with a mesh WiFi system, relying on multiple mesh nodes to create a single seamless network. My first experience with Eero mesh systems was six years ago, and since then, there have been many technological advancements, including the adoption of the WiFi 6 standard.

Even so, the underlying idea is the same. Connecting to the Internet requires one central hub, and the rest of the system can be dispersed throughout the house and communicate wirelessly with each other.

How to boost wifi signal through walls? A dedicated band should be reserved for inter-node communication and the rest for client devices. How to boost wifi signal through walls? Additionally, the market offers a wide range of choices: systems with identical units, routers that can be used in a mesh network, and more.

 I asked myself this question, “Why Asus?”

The most straightforward answer is that I already had an Asus router, but the reasoning goes deeper. Not as much as I’d like because I prefer other routers’ interfaces, but a wide range of devices is supported.

They even return to the first mesh systems released before the Asus-made AiMesh system. How to boost wifi signal through walls? Both the Asus RT-AX82U and the RT-AX88U provided excellent WiFi coverage in my office, and there were no noticeable issues with either device.

Even though I was on a conference call and there were no dropped frames, I’ll be testing it with perf to see if any packets are dropped when moving between nodes or if the handshake is truly seamless.

Why not go with a tri-band option, I hear you ask? Furthermore, you’re correct that it’s the best way to prevent backhaul traffic from affecting bandwidth, allowing the second node to broadcast a solid and reliable WiFi signal. Because it would have been too much for my network, that’s why.

Unless I had many demanding client devices (which I don’t), I didn’t need to pay more for something I wouldn’t use. How to boost wifi signal through walls? Make sure you know how much better WiFi 6 client devices can perform with the new standard.

 Then, what are the alternatives?

WiFi 5 (or the overkill WiFi 6) mesh systems with identical units are available as a specialized form of WiFi 5. A direct line of sight between the nodes (the branches) is required for optimal performance of the dual-band WiFi 5 systems. How to boost wifi signal through walls? The signal may still be pushed through, and you will have some decent Internet away from your main router if the wall is wide enough.

TP-Link Deco M5 and Google WiFi (early models) both use both bands to connect clients and communication between nodes, so I call them “half-decent” systems.

A severe restriction on capacity will be put in place. The Asus AiMesh, which I previously praised, works on the same principle, but because the hardware is so much more powerful, I won’t have any problems with bandwidth.

To fix the problem, I’d go with a tri-band WiFi 5 mesh system, like the Eero Pro or even the occasionally unreliable Netgear Orbi. Even if a significant distance separates the mesh nodes, these systems can deliver exceptional wireless performance at the second node.

At least with Netgear, the software can cause the entire system to fail (it can be prolonged), so I’d be wary of using the company’s products.

  1. Use a WiFi access point to increase the WiFi signal strength around your home.

It isn’t the one you want, but it’s the one that will make you the happiest in the long run.  It is because there are cables involved. Older homes lack CAT cable that runs through the walls, and adding them is a hassle.  I’m well aware of it because I’m the one who has to do it, and I’m delaying it as long as I possibly can. An access point’s maximum speed can be achieved by connecting your router to the access point via a cable that passes through your thick walls.

There’s the potential for interference with the primary router, but that shouldn’t be an issue in our case, given that the lack of WiFi is the immediate problem. How to boost wifi signal through walls? Then there’s the problem of not being able to roam between different networks seamlessly.

You may experience disconnections when moving from one area of your home to another despite the mesh systems’ best efforts to provide a single network experience.

As an alternative to Ethernet cables, I’d suggest fibre optics, which are less susceptible to interference and maintain bandwidth over greater distances. But it’s more of a fun fact than anything else since it’s overkill if all you want to do is add a new access point to boost the WiFi signal through a few walls.

  1. Expand your WiFi coverage by using a WiFi extender.

Most people use this method to boost their WiFi signal when they’re in a difficult-to-reach location, so I wouldn’t say I like it. In addition, these WiFi extenders are usually inexpensive, allowing you to keep using your current router without purchasing an expensive mesh system.

Then again, it may be able to do its job to some extent. The client device can connect to it because it extends one radio band. Still, the backhaul traffic will prevent many devices from using the bandwidth, the ping will be higher, and all the other things that we despise about a poor WiFi connection. You can still get some Mbps for your wireless devices even if there is no other option.

  1. A powerline adapter is a great way to connect to the Internet in areas that are difficult to access.

The concept of powerline adapters is fantastic. You can connect to the Internet through your home’s existing electrical wiring. What a wonderful thing to see! Definitely, but only under specific circumstances. How to boost wifi signal through walls? The powerline adapters avoid moving through circuits, significantly reducing the available bandwidth (in some cases, making it unusable).

I’d recommend using an appropriate wireless access point for the receiving end rather than a WiFi powerline adapter because it will perform better. Whenever possible, use separate devices in your network instead of a multiple-in-one.


There are various options for accomplishing this goal, from a mesh network to a wired access point, all of which can be done relatively quickly. While it is possible to increase WiFi signal strength through walls in an inconsistent manner, this is the most common method.


What happens to a computer mouse over time?

The performance of wireless computer mice will deteriorate over time and eventually stop working altogether.

Is it necessary to replace your mouse every so often?

Most computer mice don’t allow you to replace a component when it fails, so you’ll need a new mouse when it breaks down.