Is it possible to use different drill bits on the same drill?

Makita hammer drill: Having a high-quality hammer drill is essential for those who work with concrete. The so-called “hammer setting” on most devices of this type is used to drive the bit deeper into the masonry. Cordless devices are incredibly convenient because they can be used virtually anywhere. When people hear the name Makita, they immediately think of quality and dependability. As a leading manufacturer of power tools, this Japanese company has earned its place in the upper echelons. The company began by selling and servicing lighting and motor equipment, and its first power tool, an electric planer, was not released until 1958. Following are the best Makita hammer drill of 2021.

The XFD131 18V Cordless Drill/Driver:

This 18-volt drill driver has a maximum speed of 900 revolutions per minute and a maximum torque of 440 pound-inches. Because the brushless motor runs more relaxedly than a brushed motor, it can be used for more extended periods. The battery attached weighs just 3.8 pounds, making it ideal. The battery has a capacity of 3 amp-hours and takes 30 minutes to charge fully. This one is also the best Makita hammer drill.


Weighing in at 3.8 pounds

10 x 15 x 6 inches is the total measurement.

RPM 900

Converting 440 inches of torque into pounds


  • It only takes 30 minutes for the battery to go from empty to full.
  • Allows for recharging the battery during your lunch hour.
  • You’ll be up and running in no time at all with a rapid charge.


  • Motor without a Brush
  • That’s lightning-fast.
  • Battery Capacity: 3 A


  • Lacks the ability to do anything
  • Problems with Package Design

Rotary SDS-Plus Hammer Drill, HR2475, 1-Inch:

This SDS rotary hammer drill from Makita is unavailable in Makita’s cordless lineup. It has a rotational speed of 1,100 revolutions per minute and an output rate of 4,500 blows per minute. Drills designed to eat through concrete and masonry typically operate slower than more general-purpose ones. It’s all about the rotational force with these gadgets. It contains a torque-limiting clutch, which is unusual for a corded drill, and it disengages the motor when the bit slips.


10.7 lb. in pounds

3.87 By 19.25 by 13.1 inches

RPM 1,100.

It prevents damage by disengaging the motor.


  • Standard chucks lack the slots that an SDS chuck does at the shank’s end.
  • It increases the bit’s hold and prevents it from slipping.
  • In addition, it makes things easier for the end-user.


  • Chuck is a member of SDS
  • Angles in Bits (40 bits)
  • Limiting Clutch Torque


  • Weight of 10 lbs.
  • Increased Costs

XFD11R1B 18V LXT Subcompact Brushless Drill:

This drill/driver is an excellent choice if you’re looking for a combination drill/driver that’s both lightweight and powerful. With a total weight of only 2.8 pounds, you shouldn’t have any hand or wrist tiredness issues when using it. Because of its small size and dual LED lights, it’s an excellent tool for working in confined situations. This drill has a maximum speed of 1,700 revolutions per minute. This one is also the best Makita hammer drill.


Motor without a Brush

350-inch-pound torque

LED Dual


  • This Drill is both light and portable. It’s minor, but it’s got a lot of power.
  • When working on larger projects, this is the best approach.
  • The exact opposite is true. At 1,700 RPM, it produces 350 inch-pounds of torque.


  • Compact
  • Powerhouse


  • It’s a Big Investment

The XPH07Z 18V LXT Cordless Hammer Drill/Driver:

This is a drill that can use for anything. It is capable of driving, drilling, and hammering. Even the most complex operations like drilling through concrete and masonry may accomplish this machine’s 1,090 inch-pounds of force. Because it was specifically designed for use on construction sites, you can rest assured that this drill will withstand the distance. Battery life is indicated by a fuel gauge and the ability to change speeds depending on the task at hand.


Sixty-seven pounds

Dimensions: 12.1 x 12.1 x 11.1 inches

RPMs between 1,900 and 2,900 are available.


  • The rotational force generated by this drill is 1,090 inch-pounds.
  • Increased battery life and reduced overheating can be achieved by using brushless motors.
  • Having a hammer-like hammer motion in a tool that can both drill and drive is a great bonus.


  • Motor without a Brush
  • A lot of Torque
  • An All-In-One


  • A Higher Price Tag

Electric Driver/Drill XFD12Z 18V Brushless:

This brushless driver drill generates a rotational force of 530 inch-pounds. There are many uses for a driver-drill, and this one is no exception. The Star Protection Computer Controls and Extreme Protection Technology make this instrument perfect for use on the job site. The drill communicates with the battery while in use to prevent overheating, overloading, or over-discharging. This one is the best Makita hammer drill.


3.6 X 7.5 x 9.5 in (inch)

RPM 2,000

Without the battery, the device weighs approximately 3.4 pounds.

Five hundred thirty inches of torque is equal to 530 pounds of force.


  • Including the battery, this drill weighs 3.9 pounds.
  • It can handle the most challenging materials because of its 530 inch-pounds of torque.


  • Lightweight
  • A lot of Torque
  • Ingenious Concepts


  • For perspective on the battery’s cost.


With the suitable model of Makita hammer drill, you’ll be able to do everything from boring to demolish and everything in between with one of these multipurpose machines. It doesn’t matter if you’re putting up a warehouse stanchion or placing a picture of your Aunt Mabel on the wall. Regardless of whether a tool is corded or cordless or has specific characteristics, your priority should be finding the correct tool format for your needs.


What is a Hammer Drill?

An electric hammer drill is usually powered by a mains wire or lithium-ion battery and contains a revolving bit. You can make circular holes in a target material by pressing down on it with the bit.

Is it possible to use different drill bits on the same drill?

Yes. Depending on the chuck, virtually all bits can be used across models. SDS and SDS+ chucks and arbors necessitate specialized bits.

Are Drill Bits Common Among Different Manufacturers?

In most cases, metal, wood, and masonry bits are frequently interchangeable between manufacturers. But make sure the chuck is made for the type of bit you’re using.

Read also: Is there mercury in a pool thermometer?

Leave a Comment